14 Inch IPS A-Level Touch Screen Sensitive Monitors

How the grade is defined

• Panel condition: A-level panels on this model are new panels, not refurbished or used.
• Defect screening: Panels are checked against an accepted bright and dark spot range at intake. The exact allowed count is confirmed per order against the panel specification.
• Screening standard: Screening covers spot count, brightness uniformity and surface condition before assembly, and out-of-range panels are rejected rather than reworked.
• Surface condition: Panels are inspected for bright spots and scratches at intake, alongside the spot count check.
• Inspection report: A panel inspection report can be provided at inquiry for buyers who need documentation with the order.
• A-level vs A+: A+ is a tighter sorting tier than A-level. The difference lies in the accepted defect range, not in the panel technology; the specific tolerance for each tier is confirmed per order.
• Original vs replacement: Panels are original parts sourced through established panel suppliers. Supplier and batch documentation are confirmed per order at inquiry.

Touch specifications

• Touch technology: capacitive, not resistive.
• Touch points: multi-point capacitive input. The exact point count is confirmed per order against the touch controller specification.
• Response time: the touch controller reports contact at its own sampling rate, independent of the 60Hz panel refresh. The reporting interval is confirmed per order.
• Driver: no driver installation is required. The touch path follows HID standards and registers automatically once the Type-C cable is connected.
• HDMI-only connection: HDMI carries video only. Touch data travels over Type-C, so touch does not function when the host is connected by HDMI alone.
• Active stylus: the panel is built for capacitive finger input. Passive capacitive styluses work; active pressure-sensitive drawing pens are not supported.
• Front glass: the front glass specification and Mohs hardness figure are confirmed per order at inquiry rather than stated here as fixed values.

Specification and connection

• Resolution: 1920x1080 at 60Hz on a 16:9 surface.
• Ports: two full-function Type-C, one HDMI, one 3.5mm headphone jack.
• Single-cable operation: on hosts with full-function Type-C output, one cable carries video, power and touch data together.
• Plug and play: supported on Windows, Android and macOS for video. Touch registration on Windows and Android works without a driver; macOS touch behavior depends on the OS version and is generally limited to pointer control.
• Switch, Steam Deck and mini PC: Switch connects without its base; Steam Deck connects over its USB-C output subject to the device's own video output support; mini PCs connect over HDMI or Type-C depending on their port set.
• Brightness and contrast: specified at the model level. Exact figures are confirmed against the current datasheet at inquiry rather than stated here as fixed values.
• Speakers: dual built-in speakers are included as standard.
• Anti-glare surface: the standard configuration is a clear surface; an anti-glare option is reviewed at inquiry.

Panel intake gate

• IPS A-level panels are checked for bright and dark spot counts against an accepted range before assembly. Out-of-range panels are rejected.
• Brightness, white point and surface condition are checked per batch, since panel grade is a specified feature of this model.

Touch linearity measurement

• Touch input is verified on a reference host, confirming that tap, drag and swipe register across the active area.
• Linearity is measured at center, corners and edges, targeting the edge drift that appears when bonding is inconsistent.
• Touch data output over Type-C is checked alongside video, confirming that a single cable carries both signals.

Port and speaker check

• Both full-function Type-C ports, HDMI input and the 3.5mm audio jack are tested on every unit before packing.
• Dual built-in speakers are checked for output and channel balance.
• Dead-pixel results are recorded per unit and can be supplied as a batch report.

AQL and defective handling

• The AQL standard applied to bulk inspection is confirmed per order at contract stage rather than stated here as a fixed figure.
• Defective units in a bulk shipment are handled against the agreed inspection scope and warranty terms, which are set at order entry.

Packing stress sampling

• Sample units from each batch undergo vibration and pressure testing, since the touch layer and panel are both exposed to handling stress during international shipping.
• Carton packaging is checked for fit and cushioning before shipment.

Customization items

• Housing print: Logo and model text applied to the existing housing, with panel grade and port layout unchanged.
• Packaging set: Carton print, foam insert and accessory compartment configured per market.
• Firmware defaults: OSD language list and startup picture mode set against the tested baseline.
• Cable kit: Type-C and HDMI cable lengths, adapter type and box contents selected per order.

Commercial terms

• Minimum order quantity: 1K units.
• Samples: one paid sample is available for panel quality and touch function testing before a bulk order; samples ship in carton packaging.
• Lead time: confirmed at quotation based on order volume and configuration.
• Unit price: quoted per order against quantity and configuration; pricing is not published on this page.
• Drop shipping: reviewed at inquiry against destination and order volume.