14 Inch 100%sRGB Touch Screen Sensitive Monitor

Color and panel specifications

• Color gamut: 100% sRGB coverage, stated for the panel used on this model.
• Panel type: IPS, with LED backlighting and a wide viewing angle.
• Brightness and contrast: specified at the model level; confirm the exact figures against the current datasheet at inquiry, since they are not fixed in this page copy.
• Color depth: 8-bit processing on the display path.
• Surface: standard configuration is a clear surface; an anti-glare coating option is reviewed at inquiry rather than offered as a standard variant.
• Delta E and panel brand: not published on this page. Both are confirmed per order against the panel batch documentation at inquiry.

Touch specifications

• Touch technology: capacitive, not resistive.
• Touch points: multi-point capacitive input; the exact point count is confirmed per order against the touch controller specification.
• Response latency: the touch controller reports contact at its own sampling rate, independent of the 60Hz panel refresh; the sampling rate is confirmed per order.
• Driver requirement: none. The touch path follows HID standards and registers automatically once the Type-C cable is connected.
• Stylus support: the panel is built for capacitive finger input. Passive capacitive styluses work; active pressure-sensitive pens are not supported.
• HDMI-only connection: HDMI carries video only. Touch data travels over Type-C, so touch does not function when the host is connected by HDMI alone.

Compatibility and connection

• Operating systems: Windows and Android register touch over Type-C. macOS behavior depends on the OS version and is generally limited to basic pointer control.
• Single-cable operation: supported on hosts with full-function Type-C output that also supply sufficient power; one cable carries video, touch data and power.
• Ports: two full-function Type-C, one HDMI, one 3.5mm headphone jack.
• Consoles and handhelds: Switch connects directly without its base; PS4, PS5 and Xbox series devices connect over HDMI. Steam Deck connects over its USB-C output, subject to the device's own video output support.
• Power delivery: the required PD power level is confirmed per order against the host device and configuration, since draw varies with brightness and touch activity.
• Plug and play: no driver installation is required for video or touch on supported hosts.

Incoming panel screening

• IPS panels are checked for bright and dark spot counts against an accepted range before assembly. Out-of-range panels are rejected.
• Brightness, white point and sRGB coverage are sampled per batch, since 100% sRGB coverage is a specified feature of this model.

Touch accuracy check

• Touch input is verified on a reference host, confirming that tap, drag and swipe register across the active area.
• Touch linearity is measured at center, corners and edges, targeting the edge drift that appears when the touch layer is inconsistent.
• Touch data output over Type-C is checked alongside video, confirming that a single cable carries both signals.

Interface and function check

• Both full-function Type-C ports, HDMI input and the 3.5mm audio jack are tested on every unit before packing.
• Dual built-in speakers are checked for output and channel balance.
• Dead-pixel results are recorded per unit and can be supplied as a batch report.

Bulk inspection and defective handling

• The AQL standard applied to bulk inspection is confirmed per order at contract stage rather than stated here as a fixed figure.
• Defective units in a bulk shipment are handled against the agreed inspection scope and warranty terms, which are set at order entry.

Shipping stress sampling

• Sample units from each batch undergo vibration and pressure testing, since the touch layer and panel are both exposed to handling stress during international shipping.
• Carton packaging is checked for fit and cushioning before shipment.

Confirmed customization items

• Logo printing: Applied to the existing housing without changing the panel, touch layer or port layout.
• Custom retail packaging: Carton artwork, inner cushioning and accessory tray layout are configured for the target market.
• OSD language set and default picture mode: Configured per order against the tested baseline.
• Accessory configuration: Cable lengths, adapter type and the mix of Type-C and HDMI cables in the box.

Commercial terms

• Minimum order quantity: 1K units.
• Samples: paid samples are available for testing before a bulk order and ship in carton packaging.
• Lead time: confirmed at quotation based on order volume and configuration.
• Unit price: quoted per order against quantity and configuration; pricing is not published on this page.
• Drop shipping: reviewed at inquiry against destination and order volume.